Film Coating Machine

Coating width: 250mm, Coating length: 300mm, Coating speed: 0~120mm/s, Coating thickness: 0~6mm

Product introduction: This product is widely used in various kinds of high temperature coating research, such as ceramic film, crystal fiim, battery material film, special nano film; The development of science and technology that can adapt to the future of film formation under high temperature conditions.

Main features: 1. Adopt large area uniform heating to ensure high precision uniform temperature in cavity. 2. Flat plate coating, motor driven scraper coating, coating speed is stable and adjustable. 3. Film speed adjustable, vacuum aluminum plate can be quickly placed or removed copper foil, aluminum foil, etc., built-in vacuum pump or access to external vacuum source, substrate adsorption without deformation. 4. Standard preparation of film, coating precision, coating thickness adjustable. 5. Can be used in glove box, easy to operate, small size, can save space. 6. PLC. Touch screen control parameters are easy to set.

• Coating method: Flat plate coating, standard equipped with 250mm width film applicator, (can be increased), (optional: with slurry plate or without)

• Coating Stroke: About 300mm, the stroke is set and adjusted in the touch screen stepless Coating Driven: Motor driven, coating speed in the touch screen stepless setting adjustment

• Dimension(L*W*H): 1550mm×W450mm×H320mm

• Coating Speed: 0~120mm/s (Such as iron phosphate lithium slurry)

• Vacuum plate: Aluminum plate with vacuum

• Size of Vacuum plate: L415mm×W300mm×H32mm

• Blade thickness adjustable range: 0-6mm adjustable

• Precision: ±3 um, the optional table shows 1 um micrometer

• Heating drying system: Room temperature 130°C, digital display temperature controller, precision +1°C

• Vacuum pump: 1 built-in oil-free vacuum pump

• Operating procedures: 1. Put the Electrode on the vacuum plate, start the power supply, open the vacuum, the electrode adsorption on the vacuum plate. 2. Place the film applicator on the electrode and add the coating slurry. 3. Open the film, the film device automatically pushes the film applicator to move, automatic film. 4. Take out the film applicator and push rod, cover with the heating cap, set the heating temperature and time, and heat and dry. 5. After drying, open the heat cover, take out the coated film electrode, film device reset complete.